Karel Drbal, efekt piramida 1959.
    Petak, 19 Listopad 2018 19:09

    Karel Drbal, efekt piramida 1959.

    Radio-inženjer iz Čehoslovačke, Karel Drbal, na temelju provedenih eksperimenata došao je do zaključka da postoji veza između oblika unutarnjeg prostora piramide i procesa koji se odvijaju u ovom prostoru. Tako je postojala pretpostavka da oblik piramide nakuplja kozmičke zrake ili neku drugu energiju, ali nepoznatu znanosti. U središtu priče je patentna isprava broj 91304 koja je izdana češkom inženjeru i izumitelju Karlu Drbalu (inače utemeljitelju radija i televizije u Čehoslovačkoj) za nemehaničko oštrenje žileta i britvi u modelu piramide proporcija one Keopsove. Neizravni inicijator njegova izuma bio je radioestezist Antoine Bovis koji je u Kraljevskoj odaji Velike piramide primijetio da se mrtve životinje ne raspadaju već se mumificiraju. Zaključio je da piramida ima moć mumificiranja i počeo eksperimentirati s modelima Keopsove piramide. Koristeći magnetski visak, u njima je pronašao neku vrstu zračenja sličnu onoj u pravoj egipatskoj piramidi. Eksperimenti su davali rezultate – meso, jaja i male mrtve životinje postajale bi savršeno mumificirane. Isti je eksperiment ponovio i Drbal. To ga je navelo na zaključak da u piramidama mora postojati neka vrsta energije. Tako je u kartonski model Keopsove piramide, dužine osnovice 12,5 cm i visine 8 cm, horizontalno i po dužini u smjeru sjever-jug na jednu trećinu visine piramide računajući od baze, stavio žilet odlične kvalitete čelika. Smatrao je da bi djelovanje na oštricu žileta bilo dostatna naznaka o djelovanju neke sile u piramidi. Pretpostavka da će energija skrivena u utrobi piramide otupjeti žilet bila je vrlo brzo oborena: žilet je postao oštriji tako da se Drbal s istim mogao brijati i preko 50 puta. Kasnije je dokazao i to da se žilet može dobro naoštriti i u piramidi drukčijih proporcija. Njegov patent je prihvaćen 1959. ali Drbal ga je prijavio čak desetljeće ranije. Naime, neprestano je morao pronalaziti nove znanstvene argumente da bi objasnio kako ova iznimno jednostavna sprava, bez ikakvog vidljivog izvora energije, može potpuno tup žilet pretvoriti u najoštriji mogući. No, stvar je radila i patent je odobren, ali se Drbal dobro pomučio da dokuči što se zbiva u piramidi. Da bi pronašao odgovor kako se to događa, posvetio se proučavanju utjecaja mikrovalova te svemirskih i zemaljskih zračenja na kristalnu strukturu oštrice žileta. Proučavao je zemljino magnetsko polje koje je vrlo niske frekvencije, jer je jedan od uvjeta uspješnog eksperimenta bio postavljanje žileta u horizontalan položaj u odnosu na magnetno polje Zemlje. Na kraju je zaključio da kozmički mikrovalovi, većinom oni koje zrači Sunce energetiziraju šuplju unutrašnjost malog modela piramide zajedno sa koncentriranim magnetskim zračenjem Zemlje. Takve energije hrane piramidu i koncentrirane u njenoj šupljini omogućuju i malom modelu veliku efikasnost u raznim primjenama. Taj automatski proces regeneracije utječe na smanjenje poremećaja u unutrašnjosti mikro-kristalne strukture rešetke oštrice žileta koji nastaju uporabom. Jednostavnije, nestaje "zamor" materijala, mehanička i fizička svojstva materijala se obnavljaju tj. regeneriraju, a to je moguće jer je mikrokristalna struktura rešetke elastičnog tipa. Tako je otkrivena tajna utjecaja piramide na oštricu žileta. Za patentni ured bilo je dovoljno. Karl Drbal sastavio je ljestvicu efikasnosti brijanja jer je primijetio da oštrina obnovljenog žileta varira zbog meteoroloških i kozmičkih poremećaja U prvih pet godina i tri mjeseca eksperimentiranja ispitao je ukupno 18 žileta raznih proizvođača i postigao do 200 brijanja jednim žiletom. Tijekom dvadeset i pet godina upotrijebio je samo 68 žileta.

     

    HD KAREL DRBAL 750 F


    Kako je patentiran model piramide
    Ovo je priča o patentu br. 91304, čudnom izumu koji je obišao cijeli svijet, i dokazao kako šupljina malog modela piramide ima moć da naoštri žilet. Karl Drbal bio je pionir uvođenja radia i televizije u Čehoslovačkoj. Velik dio svog života posvetio je istraživanjima energije i dao znatan doprinos na polju eksperimentiranja i upotrebe modela piramide. Najviše su ga privlačile energije o kojima se, u prvoj polovini ovog stoljeća, znalo vrlo malo ili ništa. Treba naglasiti da je patent prijavljen 1949. godine u Pragu a prihvaćen i odobren tek 1959. godine. Budući da je inače bilo potrebno između jedne i tri godine da češka komisija za patente razmotri i ispita ponuđeni patent, očito je kako je dotična komisija smatrala ovaj slučaj zaista posebnim. Tokom svih tih 10 godina, uporni Karl morao je svako malo pronalaziti nove i nove naučne argumente da bi objasnio kako ova iznimno jednostavna " sprava ", bez ikakvog vidljivog izvora energije, može potpuno tup žilet pretvoriti u najoštriji mogući. Kada je prijateljima rekao da želi patentirati model piramide, svi su mu se smijali. Bili su radio-inženjeri kao i on sâm i jedva su čekali da vide kako će komisija, sastavljena od samih stručnjaka, reagirati na " faraonsku spravu za brijanje ". Ipak, svi njegovi prijatelji već su dobro znali što piramida može jer su se i sami obrijali jednim te istim žiletom više od stotinu puta.

     

    HD KAREL DRBAL 750 E

      

    Republic of Czechoslovakia
    Office For Patents And Inventions
    Published August, 1959
    Patent File Number 91304

    The right to use this invention is the property of the State according to Section 3, Paragraph G, Number 34/1957

    Karel Drbal, Prague

    Method of Maintaining Razor Blades and the Shape of Straight Razors.
    Submitted 4 November, 1949(P2399-49)
    Patent valid from 1 April, 1952


    The invention relates to the method of maintaining of razor blades and straight razors sharp without the auxiliary source of energy. To sharpen the blades, therefore no mechanical, thermal, chemical or electrical (From an artificial source) means are being used. There are various mechanical sharpening devices being used till now to sharpen used razor blades. The blade is sharpened by crude application of sharpening material, which always results in certain new wear of the blade during the sharpening process. Furthermore, it is known that the influence of an artificial magnetic field improves the sharpening of razor blades and straight razors, if their blades lay in the direction of magnetic lines. According to this invention, the blade is placed in earth's magnetic field under a hollow pyramid made of dielectric material such as hard paper, paraffin paper, hard cardboard, or some plastic. The pyramid has an opening in its base through which the blade is inserted. This opening can be square, circular, or oval. The most suitable pyramid is a four sided one with a square base, where one side is conveniently equal to the height of the pyramid, multiplied by  /2. [pi or 3.14/2] For example, for the height of 10CM, the side of 15.7 centimeters is chosen. The razor blade of straight razor is placed on the support made also of dielectric material, same as the pyramid, or other such as cork, wood, or ceramics, paraffin, paper, et. cetra. Its height is chosen between 1/5 and 1/3 of the height of the pyramid, this support rests also on a plane made of dielectric material. The size of this support should be chosen as to leave the sharp edges free. Its height could vary from the limits stated above. Although it is not absolute necessary, it is recommended that the blade be placed on the support with its sharp edges facing west or east respectively, leaving its side edges as well as its longitudinal axis oriented in North South direction. In other words to increase the effectiveness of the device it is recommended lie in essence in the direction of the magnetic lines of the horizontal component of the earth's magnetism. This position improves the performance of the device, it is not however essential for the application of the principle of this invention. After the blade is properly placed it is covered with the pyramid in such a way that its side walls face north, south, east, and west, while its edges point in north-west, south-west, south-east, and north-east direction. It is beneficial to leave a new blade in the pyramid one to two weeks before using it. It is essential to place it there immediately after the first shave, and not the old, dull one. But it is possible to use an old one, if it is properly resharpened. The blade placed using the method above is left unobstructed until the next shave. The west edge should always face west. It improves the sharpening effect.

    Example:
    When this device was used, 1778 shaves were obtained using using 16 razor blades, which is 111 shaves per blade on the average. The brand used was "Dukat Zlato" made in Czechoslovakia. The lowest count was 51, the highest was 200. It is considered very easy to achieve up to 50 shaves on the average. (for a medium hard hair). The following shows how the invention could save both valuable material and money: One razor blade mentioned above weighs 0.51 grams. We will consider 50 shaves on average when placed in the pyramid against 5 shaves when it is not. It is obvious that the number of shaves, degree of wear, and the ability to regenerate the dull edge depends on the quality of the material, quality of sharpening process, and hardness. ....given numbers are average and could be in fact much better. In the course of the year one therefore uses 73 razor blades without the aid of the pyramid while only eight razor blades while using the pyramid. Annual saving would be 65 razor blades or 33.15 grams of steel per person. Only the pyramid shape has been used for this invention, but this invention is not limited to this shape, as it can cover other geometric shapes made of dielectric material that was used in accordance with the invention. And that this shape also causes regeneration of sharp edges of shaving blades by lowering of stresses and reducing the number of defects in the grids of crystal units, in other words recovering and renewing the mechanical and physical properties of the blade.

    The Summary Of The Patent
    The method of maintaining the razor blades and straight razor blades sharp by placing them in the magnetic field in such a way that the sharp edge lies in the direction of the magnetic lines. The blades are placed in the earth's magnetic field and are covered by the hollow pyramid made of dielectric material such as hard paper, impregnated or paraffin paper, cardboard or plastic. The most suitable is a pyramid with a square base. It is the best when one side is equal the height of the cone multiplied by  /2. [Pi or 3.14 /2] The pyramid is provided is provided with square, round, or rectangular opening in its base and is oriented with its side edges pointing to the north-west, south-west, south-east, and north-east directions. The razor blade or straight razor is placed horizontally on the support made also of dielectric material, same as the pyramid or other such as cork, wood, paraffin paper, or ceramics, the height being height being between 1/2 and 1/3 of the height of the pyramid and which in turn rests on the plane made of dielectric material. The blade is positioned in north-south direction. Method as article 1 and identified by the blade is placed in the cone, same side facing the same direction after each use.

     

    HD KAREL DRBAL 750 A

    HD KAREL DRBAL 750 B

    HD KAREL DRBAL 750 C

    Pročitano 63 puta

    Energetski Projekti

    hrastovic energetski projekti banner

    Energetski Video

    hrastovic energetski video banner

    Energetski Članci

    hrastovic energetski clanci banner

    Random video

    Udruga SOLAR

    Udruga SOLAR  je nastala 2011. godine kao potreba organiziranja civilnog društva u smjeru korištenja i primjene obnovljivih izvora energije, primjene alternativnih izvora energije te povećanja energijske učinkovitosti na razini korisnika i lokalne zajednice.

    Opširnije

    O nama

    Hrastović Inženjering d.o.o. od 2004. se razvija u specijaliziranu tvrtku za projektiranje i primjenu obnovljivih izvora energije. Osnova projektnog managementa održivog razvitka društva je povećanje energijske djelotvornosti klasičnih instalacija i zgrada te projektiranje novih hibridnih energijskih sustava sunčane arhitekture.

    Cijeli živi svijet pokreće i održava u postojanju stalni dotok Sunčeve energije, a primjenom transformacijskih tehnologija Sunce bi moglo zadovoljiti ukupne energetske potrebe društva.

    Kontakt info

    HRASTOVIĆ Inženjering d.o.o.

    Dario Hrastović, dipl.ing.stroj.

    Kralja Tomislava 82
    31417 Piškorevci
    Hrvatska

    E-mail:dario.hrastovic@gmail.com
    Fax: 031-815-006
    Mobitel:099-221-6503
    © HRASTOVIĆ Inženjering d.o.o. - design & hosting by Medialive